CI::Reporter is an add-on to Test::Unit, RSpec and Cucumber that allows you to generate XML reports of your test, spec and/or feature runs. The resulting files can be read by a continuous integration system that understands Ant's JUnit report XML format, thus allowing your CI system to track test/spec successes and failures.
== Dependencies
CI::Reporter has one required dependency on Builder, but since many will have a viable version of Builder via Rails' ActiveSupport gem, Builder is not a direct dependency of the project at the moment. Instead, ensure that you have either the +builder+ or +activesupport+ gem installed before continuing. CI::Reporter will raise an exception at runtime if it cannot locate Builder.
== Installation
CI::Reporter is available as a gem. To install the gem, use the usual gem command:
gem install ci_reporter
== Usage
CI::Reporter works best with projects that use a +Rakefile+ along with the standard <code>Rake::TestTask</code> or <code>Spec::Rake::SpecTask</code> tasks for running tests or examples, respectively. In this fashion, it hooks into <code>Test::Unit</code> or +RSpec+ using environment variables recognized by these custom tasks to inject the CI::Reporter code into the test or spec runs. If you're using the Rails plugin, step 1 is unnecessary; skip to step 2.
1. To use CI::Reporter, simply add the following lines to your Rakefile:
require 'rubygems'
gem 'ci_reporter'
require 'ci/reporter/rake/rspec' # use this if you're using RSpec
require 'ci/reporter/rake/cucumber' # use this if you're using Cucumber
require 'ci/reporter/rake/test_unit' # use this if you're using Test::Unit
2. Next, either modify your Rakefile to make the <code>ci:setup:rspec</code>, <code>ci:setup:cucumber</code> or <code>ci:setup:testunit</code> task a dependency of your test tasks, or include them on the Rake command-line before the name of the task that runs the tests or specs.
rake ci:setup:testunit test
Report files are written, by default, to the <code>test/reports</code>, <code>features/reports</code> or <code>spec/reports</code> subdirectory of your project. If you wish to customize the location, simply set the environment variable CI_REPORTS (either in the environment, on the Rake command line, or in your Rakefile) to the location where they should go.
== Advanced Usage
If you don't have control over the Rakefile or don't want to modify it, CI::Reporter has a substitute rake file that you can specify on the command-line. It assumes that the main project rake file is called +Rakefile+ and lives in the current directory. Run like so:
rake -f GEM_PATH/stub.rake ci:setup:testunit test
rake -f GEM_PATH/stub.rake ci:setup:rspec spec
rake -f GEM_PATH/stub.rake ci:setup:cucumber features
If for some reason you can't use the above technique to inject CI::Reporter (e.g., you're not using Rake), you'll have to do one of these:
1. If you're using <code>Test::Unit</code>, ensure the <code>ci/reporter/rake/test_unit_loader.rb</code> file is loaded or required at some point before the tests are run.
2. If you're using +RSpec+, you'll need to pass the following arguments to the +spec+ command:
--require GEM_PATH/lib/ci/reporter/rake/rspec_loader
--format CI::Reporter::RSpec
3. If you're using Cucumber, you'll need to cheat slightly so that Cucumber's step definition autoloading will still work. Instead of calling the +cucumber+ script directly, run:
ruby -r GEM_PATH/lib/ci/reporter/rake/cucumber_loader -S cucumber --format CI::Reporter::Cucumber
There's a bit of a chicken and egg problem because rubygems needs to be loaded before you can require any CI::Reporter files. If you cringe hard-coding a full path to a specific version of the gem, you can also copy the +rspec_loader+ file into your project and require it directly -- the contents are version-agnostic and are not likely to change in future releases.
== Environment Variables
* +CI_REPORTS+: if set, points to a directory where report files will be written.
* +CI_CAPTURE+: if set to value "off", stdout/stderr capture will be disabled.
== Source
You can get the CI::Reporter source using Git, in any of the following ways:
git clone git://git.caldersphere.net/ci_reporter.git
git clone git://github.com/nicksieger/ci_reporter.git
You can also download a tarball of the latest CI::Reporter source at http://github.com/nicksieger/ci_reporter/tree/master.
== License
This software is released under an MIT license. For details, see the LICENSE.txt file included with the distribution. The software is copyright (c) 2006-2010 Nick Sieger <[email protected]>.
== Dependencies
CI::Reporter has one required dependency on Builder, but since many will have a viable version of Builder via Rails' ActiveSupport gem, Builder is not a direct dependency of the project at the moment. Instead, ensure that you have either the +builder+ or +activesupport+ gem installed before continuing. CI::Reporter will raise an exception at runtime if it cannot locate Builder.
== Installation
CI::Reporter is available as a gem. To install the gem, use the usual gem command:
gem install ci_reporter
== Usage
CI::Reporter works best with projects that use a +Rakefile+ along with the standard <code>Rake::TestTask</code> or <code>Spec::Rake::SpecTask</code> tasks for running tests or examples, respectively. In this fashion, it hooks into <code>Test::Unit</code> or +RSpec+ using environment variables recognized by these custom tasks to inject the CI::Reporter code into the test or spec runs. If you're using the Rails plugin, step 1 is unnecessary; skip to step 2.
1. To use CI::Reporter, simply add the following lines to your Rakefile:
require 'rubygems'
gem 'ci_reporter'
require 'ci/reporter/rake/rspec' # use this if you're using RSpec
require 'ci/reporter/rake/cucumber' # use this if you're using Cucumber
require 'ci/reporter/rake/test_unit' # use this if you're using Test::Unit
2. Next, either modify your Rakefile to make the <code>ci:setup:rspec</code>, <code>ci:setup:cucumber</code> or <code>ci:setup:testunit</code> task a dependency of your test tasks, or include them on the Rake command-line before the name of the task that runs the tests or specs.
rake ci:setup:testunit test
Report files are written, by default, to the <code>test/reports</code>, <code>features/reports</code> or <code>spec/reports</code> subdirectory of your project. If you wish to customize the location, simply set the environment variable CI_REPORTS (either in the environment, on the Rake command line, or in your Rakefile) to the location where they should go.
== Advanced Usage
If you don't have control over the Rakefile or don't want to modify it, CI::Reporter has a substitute rake file that you can specify on the command-line. It assumes that the main project rake file is called +Rakefile+ and lives in the current directory. Run like so:
rake -f GEM_PATH/stub.rake ci:setup:testunit test
rake -f GEM_PATH/stub.rake ci:setup:rspec spec
rake -f GEM_PATH/stub.rake ci:setup:cucumber features
If for some reason you can't use the above technique to inject CI::Reporter (e.g., you're not using Rake), you'll have to do one of these:
1. If you're using <code>Test::Unit</code>, ensure the <code>ci/reporter/rake/test_unit_loader.rb</code> file is loaded or required at some point before the tests are run.
2. If you're using +RSpec+, you'll need to pass the following arguments to the +spec+ command:
--require GEM_PATH/lib/ci/reporter/rake/rspec_loader
--format CI::Reporter::RSpec
3. If you're using Cucumber, you'll need to cheat slightly so that Cucumber's step definition autoloading will still work. Instead of calling the +cucumber+ script directly, run:
ruby -r GEM_PATH/lib/ci/reporter/rake/cucumber_loader -S cucumber --format CI::Reporter::Cucumber
There's a bit of a chicken and egg problem because rubygems needs to be loaded before you can require any CI::Reporter files. If you cringe hard-coding a full path to a specific version of the gem, you can also copy the +rspec_loader+ file into your project and require it directly -- the contents are version-agnostic and are not likely to change in future releases.
== Environment Variables
* +CI_REPORTS+: if set, points to a directory where report files will be written.
* +CI_CAPTURE+: if set to value "off", stdout/stderr capture will be disabled.
== Source
You can get the CI::Reporter source using Git, in any of the following ways:
git clone git://git.caldersphere.net/ci_reporter.git
git clone git://github.com/nicksieger/ci_reporter.git
You can also download a tarball of the latest CI::Reporter source at http://github.com/nicksieger/ci_reporter/tree/master.
== License
This software is released under an MIT license. For details, see the LICENSE.txt file included with the distribution. The software is copyright (c) 2006-2010 Nick Sieger <[email protected]>.