SafeYAML

Build Status Gem Version

The SafeYAML gem provides an alternative implementation of YAML.load suitable for accepting user input in Ruby applications. Unlike Ruby's built-in implementation of YAML.load, SafeYAML's version will not expose apps to arbitrary code execution exploits (such as the ones discovered in Rails in early 2013).

If you encounter any issues with SafeYAML, check out the 'Common Issues' section below. If you don't see anything that addresses the problem you're experiencing, by all means, create an issue!

Installation

Add this line to your application's Gemfile:

gem "safe_yaml"

Configuration

If all you do is add SafeYAML to your project, then YAML.load will operate in "safe" mode, which means it won't deserialize arbitrary objects. However, it will issue a warning the first time you call it because you haven't explicitly specified whether you want safe or unsafe behavior by default. To specify this behavior (e.g., in a Rails initializer):

SafeYAML::OPTIONS[:default_mode] = :safe # or :unsafe

Another important option you might want to specify on startup is whether or not to allow symbols to be deserialized. The default setting is false, since symbols are not garbage collected in Ruby and so deserializing them from YAML may render your application vulnerable to a DOS (denial of service) attack. To allow symbol deserialization by default:

SafeYAML::OPTIONS[:deserialize_symbols] = true

For more information on these and other options, see the "Usage" section down below.

What is this gem for, exactly?

Suppose your application were to use a popular open source library which contained code like this:

class ClassBuilder
  def []=(key, value)
    @class ||= Class.new

    @class.class_eval <<-EOS
      def #{key}
        #{value}
      end
    EOS
  end

  def create
    @class.new
  end
end

Now, if you were to use YAML.load on user input anywhere in your application without the SafeYAML gem installed, an attacker who suspected you were using this library could send a request with a carefully-crafted YAML string to execute arbitrary code (yes, including system("unix command")) on your servers.

This simple example demonstrates the vulnerability:

yaml = <<-EOYAML
--- !ruby/hash:ClassBuilder
"foo; end; puts %(I'm in yr system!); def bar": "baz"
EOYAML

> YAML.load(yaml)
I'm in yr system!
=> #<ClassBuilder:0x007fdbbe2e25d8 @class=#<Class:0x007fdbbe2e2510>>

With SafeYAML, the same attacker would be thwarted:

> require "safe_yaml"
=> true
> YAML.load(yaml, :safe => true)
=> {"foo; end; puts %(I'm in yr system!); def bar"=>"baz"}

Usage

When you require the safe_yaml gem in your project, YAML.load is patched to accept one additional (optional) options parameter. This changes the method signature as follows:

  • for Syck and Psych prior to Ruby 1.9.3: YAML.load(yaml, options={})
  • for Psych in 1.9.3 and later: YAML.load(yaml, filename=nil, options={})

The most important option is the :safe option (default: true), which controls whether or not to deserialize arbitrary objects when parsing a YAML document. The other options, along with explanations, are as follows.

  • :deserialize_symbols (default: false): Controls whether or not YAML will deserialize symbols. It is probably best to only enable this option where necessary, e.g. to make trusted libraries work. Symbols receive special treatment in Ruby and are not garbage collected, which means deserializing them indiscriminately may render your site vulnerable to a DOS attack.

  • :whitelisted_tags: Accepts an array of YAML tags that designate trusted types, e.g., ones that can be deserialized without worrying about any resulting security vulnerabilities. When any of the given tags are encountered in a YAML document, the associated data will be parsed by the underlying YAML engine (Syck or Psych) for the version of Ruby you are using. See the "Whitelisting Trusted Types" section below for more information.

  • :custom_initializers: Similar to the :whitelisted_tags option, but allows you to provide your own initializers for specified tags rather than using Syck or Psyck. Accepts a hash with string tags for keys and lambdas for values.

  • :raise_on_unknown_tag (default: false): Represents the highest possible level of paranoia. If the YAML engine encounters any tag other than ones that are automatically trusted by SafeYAML or that you've explicitly whitelisted, it will raise an exception. This may be a good choice if you expect to always be dealing with perfectly safe YAML and want your application to fail loudly upon encountering questionable data.

All of the above options can be set at the global level via SafeYAML::OPTIONS. You can also set each one individually per call to YAML.load; an option explicitly passed to load will take precedence over an option specified globally.

What if I don't want to patch YAML?

Excellent question! You can also get the methods SafeYAML.load and SafeYAML.load_file without touching the YAML module at all like this:

require "safe_yaml/load" # instead of require "safe_yaml"

This way, you can use SafeYAML.load to parse YAML that you don't trust, without affecting the rest of an application (if you're developing a library, for example).

Supported Types

The way that SafeYAML works is by restricting the kinds of objects that can be deserialized via YAML.load. More specifically, only the following types of objects can be deserialized by default:

  • Hashes
  • Arrays
  • Strings
  • Numbers
  • Dates
  • Times
  • Booleans
  • Nils

Again, deserialization of symbols can be enabled globally by setting SafeYAML::OPTIONS[:deserialize_symbols] = true, or in a specific call to YAML.load([some yaml], :deserialize_symbols => true).

Whitelisting Trusted Types

SafeYAML supports whitelisting certain YAML tags for trusted types. This is handy when your application uses YAML to serialize and deserialize certain types not listed above, which you know to be free of any deserialization-related vulnerabilities.

The easiest way to whitelist types is by calling SafeYAML.whitelist!, which can accept a variable number of safe types, e.g.:

SafeYAML.whitelist!(Foo, Bar)

You can also whitelist YAML tags via the :whitelisted_tags option:

# Using Syck
SafeYAML::OPTIONS[:whitelisted_tags] = ["tag:ruby.yaml.org,2002:object:OpenStruct"]

# Using Psych
SafeYAML::OPTIONS[:whitelisted_tags] = ["!ruby/object:OpenStruct"]

And in case you were wondering: no, this feature will not allow would-be attackers to embed untrusted types within trusted types:

yaml = <<-EOYAML
--- !ruby/object:OpenStruct 
table: 
  :backdoor: !ruby/hash:ClassBuilder 
    "foo; end; puts %(I'm in yr system!); def bar": "baz"
EOYAML

> YAML.safe_load(yaml)
=> #<OpenStruct :backdoor={"foo; end; puts %(I'm in yr system!); def bar"=>"baz"}>

Known Issues

If you add SafeYAML to your project and start seeing any errors about missing keys, or you notice mysterious strings that look like ":foo" (i.e., start with a colon), it's likely you're seeing errors from symbols being saved in YAML format. If you are able to modify the offending code, you might want to consider changing your YAML content to use plain vanilla strings instead of symbols. If not, you may need to set the :deserialize_symbols option to true, either in calls to YAML.load or---as a last resort---globally, with SafeYAML::OPTIONS[:deserialize_symbols].

Also be aware that some Ruby libraries, particularly those requiring inter-process communication, leverage YAML's object deserialization functionality and therefore may break or otherwise be impacted by SafeYAML. The following list includes known instances of SafeYAML's interaction with other Ruby gems:

  • ActiveRecord: uses YAML to control serialization of model objects using the serialize class method. If you find that accessing serialized properties on your ActiveRecord models is causing errors, chances are you may need to:
    1. set the :deserialize_symbols option to true,
    2. whitelist some of the types in your serialized data via SafeYAML.whitelist! or the :whitelisted_tags option, or
    3. both
  • delayed_job: Uses YAML to serialize the objects on which delayed methods are invoked (with delay). The safest solution in this case is to use SafeYAML.whitelist! to whitelist the types you need to serialize.
  • Guard: Uses YAML as a serialization format for notifications. The data serialized uses symbolic keys, so setting SafeYAML::OPTIONS[:deserialize_symbols] = true is necessary to allow Guard to work.
  • sidekiq: Uses a YAML configiuration file with symbolic keys, so setting SafeYAML::OPTIONS[:deserialize_symbols] = true should allow it to work.

The above list will grow over time, as more issues are discovered.

Versioning

SafeYAML will follow semantic versioning so any updates to the first major version will maintain backwards compatability. So expect primarily bug fixes and feature enhancements (if anything!) from here on out... unless it makes sense to break the interface at some point and introduce a version 2.0, which I honestly think is unlikely.

Requirements

SafeYAML requires Ruby 1.8.7 or newer and works with both Syck and Psych.

If you are using a version of Ruby where Psych is the default YAML engine (e.g., 1.9.3) but you want to use Syck, be sure to set YAML::ENGINE.yamler = "syck" before requiring the safe_yaml gem.