specdown

Build Status

Write your README in markdown, and execute it with specdown.

Why?

When you write a README for a library, a class, a command, etc., you're forced to stop and consider your user:

  • How are they going to use it?
  • What kind of API should I provide?
  • How can I convince someone to use my library?

What if you write the README first, before writing your tests or your code? This is the premise of README Driven Development. See Tom Preston-Werner's blog post on the topic for a quick introduction to all of its benefits.

Duplication

One pain point I've encountered with README Driven Development is duplication between my tests and my documentation. Quite often, I'll end up spending a good deal of time translating most of my README's into executable tests in Cucumber or RSpec. Not only does this lower my productivity, it also forces me to maintain information about my code in two places: the documentation, and the tests.

Wouldn't it be great if your documentation and your tests were one and the same? For me, this was the promise of Cucumber, a tool I still use and love. However, I find that the repetitive nature of Gherkin, along with the hidden nature of the step definitions, mitigates against the likelihood that my feature files will actually serve as the primary documentation for my project. Readers will tune out when asked to read a page full of repetitive "Given/When/Then" scenarios, or they'll be forced to look elsewhere for the information they need because the step definitions hide the API.

Installation

Right now, specdown only supports Ruby. Next, I'll write a javascript implementation. Then, I don't know what language. Regardless, the goal is that you could use specdown with any programming language you desire.

To install the specdown ruby gem, simply:

$ gem install specdown

It comes with a specdown command. Try running it. Doesn't matter where.

Tutorial

The quickest way to learn specdown is to develop a simple ruby library with it. This tutorial should take about 10 minutes. Feel free to skip to the specdown command line reference at the end of this README.

Let's develop a simple todo list library. We'll be using github-flavored markdown for all of our specdown.

We'll start by describing our library:

Todo
====================

The `todo` gem provides a simple ruby DSL for managing your TO DO list via IRB. 


Why?
--------------------------

Most people would prefer to manage their TODO list through a website, mobile app, or desktop app.
But some geeks prefer doing everything in the terminal. If you're that kind of geek, read on.


Installation
--------------------------

To get started, first install the "todo" gem:

    $ gem install todo

Next, fire up IRB and load your gem:

    $ irb
    > require 'rubygems'
    > require 'todo'

You're now ready to start interacting with your TODO list via the IRB prompt. 

Our readme tells you what the library is, why you might want to use it, and how to get started.

We haven't written any real code yet, but let's go ahead and let specdown take a crack at executing it. Save your readme in your current working directory (I'm going to assume you call it "readme.markdown"), then run specdown readme.markdown at the command line.

$ specdown readme.markdown

  readme.markdown: ..

  1 markdown
  2 tests
  2 passing
  0 failures

Interesting. Specdown found two tests inside our README, then executed them and found that they were passing. But what were those tests?

Specdown works by parsing a README into a tree, letting the header structure form the nodes of the tree. Here's what our tree looks like so far:

                #Todo
                /    \
               /      \
              /        \
             /          \
            /            \
           /              \
          /                \
      ##Why?             ##Installation

Specdown performs an exhaustive depth-first search on the tree from the root to each leaf, collecting ruby codeblocks along the way. Our two tests are thus:

  • #Todo -> ##Why?
  • #Todo -> ##Installation

However, at this point we have not yet written any ruby code blocks inside our markdown, so the tests are empty (and therefore passing by default). Let's change that. Add the following section to the end of your README:

Usage
-------------------

You'll use the `todo` method to interact with your list. For example, to see what's inside your list, simply call the `todo` method:

```ruby
todo #==> []
```

We've just created our first executable test. When we surrounded the todo code with a ruby backtick fence, we told specdown to execute that code. The "#==> []" is of course not executable - it's just a comment.

Now if you run the specdown command, you'll get an exception report telling you that the "todo" constant is undefined:

$ specdown readme.markdown

  readme.markdown: ..F

  ----------------------------
  1 markdown
  2 tests
  1 passing
  1 failing
  ----------------------------

  In readme.markdown: #<NameError>: (eval):2:in `execute_code': undefined local variable or method `todo'

How can we rectify that?

Create a "todo.rb" file inside your current working directory, and add the following code to it:

def todo
end

Then, create a "specdown" directory inside your current working directory and add another ruby file "specdown/env.rb" with the following code:

$LOAD_PATH.unshift "." # ruby 1.9+
require "todo"

Run the specdown command again, and all tests should pass.

Next, let's show people how to add items to our todo list:

To add an item to your `todo` list, simply pass a string to the `todo!` method:

```ruby
todo! 'buy groceries'
```

**"buy groceries" is now in your todo list.** Call the `todo` method again to confirm.

Lastly, to remove an item from your list, pass it to the `done!` method:

```ruby
done! 'buy groceries'
```

**Your list should now be empty again**.

Notice that we surrounded some assertions with double stars. Run the specdown command and it will report an undefined "implicit" assertion:

$ specdown readme.markdown

  readme.markdown: ..U

  ----------------------------
  1 markdown
  2 tests
  1 passing
  1 undefined
  0 failures
  ----------------------------


  Now add the following implicit spec definition to a file suffixed with ".specdown":

  "buy groceries" is now in your todo list
  ----------------------------------------

      pending # replace this with the code you wish you had


  Your list should now be empty again
  -----------------------------------

      pending # replace this with the code you wish you had

Create a "specdown" directory inside your current working directory, then add markdown to it. (Note: "specdown" files simply contain markdown, but are interpreted by specdown as containing implicit specifications. If you've used cucumber before, you can think of these as something similar to a cucumber step definition.)

If you rerun the specdown command, you'll get notified that your test is pending now. We can fill in the implicit specifications thusly. I'd like to use RSpec should expectations to fill out my tests; luckily, if specdown detects that the "rspec" gem is installed, it will make RSpec expectations available to your tests. Otherwise, it will default to test/unit assertions. We can ensure that "rspec" expectations are available in our tests by creating a Gemfile inside our current working directory with the following content:

source "http://rubygems.org"

gem "rspec"
gem "specdown"

Now run bundle at the command line. Next, update your "readme.specdown" file and fill out the tests:

"buy groceries" is now in your todo list
----------------------------------------

    todo.should include("buy groceries")


Your list should now be empty again
-----------------------------------

    todo.should be_empty

Great! Now run bundle exec specdown readme.markdown and watch your tests fail! Keep it up, implementing just enough code to get your all of your tests passing.

Implicit v. Explicit Assertions

Note that nothing requires us to create implicit assertions. We could have just as easily embedded these assertions in our main readme:

To add an item to your `todo` list, simply pass a string to the `todo` method:

```ruby
todo! 'buy groceries'
todo.should include('buy groceries')
```

Call the `todo` method yourself to confirm.

Lastly, to remove an item from your list, pass it to the `done!` method:

```ruby
done! 'buy groceries'
todo.should be_empty
```

However, we've sacrificied the readability (and utility) of our README by doing so.

Setting up your test environment

Similar to the cucumber testing framework: if you put a ruby file somewhere inside your "specdown" directory, specdown will find it and load it.

Configuring the Expectation / Assertion framework

As of version 0.1.0, specdown supports both RSpec expectations and Test::Unit assertions.

Specdown will default to RSpec expectations, but if it can't find the "rspec" gem installed on your system, it will fall back to Test::Unit assertions.

You can also configure Specdown manually to use RSpec expectations or Test::Unit assertions.

RSpec expectations

Create a "support" directory inside your specdown directory, and add an env.rb file containing the following Ruby code:

Specdown::Config.expectations = :rspec

You can now use RSpec expectations in your tests.

Using Test::Unit::Assertions

Create a "specdown/support/env.rb" file in your app, then add the following to it:

Specdown::Config.expectations = :test_unit

You can now use Test::Unit::Assertions inside your tests.

Test hooks (before/after/around)

You can create test hooks that run before, after, and around tests. You can create global hooks, or hooks that run only for specific specdown files.

Global hooks

To create a global before hook, use the Specdown.before method:

Specdown.before do
  puts "I run before every single test!"
end

That before hook will - you guessed it - RUN BEFORE EVERY SINGLE TEST.

Similary, you can run some code after every single test via the Specdown.after method:

Specdown.after do
  puts "I run after every single test!"
end

Whenever you need some code to run before and after every single test, use the Specdown.around method:

Specdown.around do
  puts "I run before _AND_ after every single test!"
end

Scoping your hooks to specific markdown files

You might, at times, want hooks to run only for certain files.

You can pass filenames (or regular expressions) to the Specdown.before, Specdown.after, and Specdown.around methods. The hooks will then execute whenever you execute any markdown file with matching filenames.

Specdown.before "somefile.markdown", /^.*\.database.markdown$/ do
  puts "This runs before every test within 'somefile.markdown', and
        before every test in any markdown file whose filename ends 
        with '.database.markdown'"
end

specdown command line

You can run specdown -h at the command line to get USAGE and options.

If you run specdown without any arguments, specdown will look for a "specdown" directory inside your current working directory, then search for any markdown files inside of it, and also load any ruby files inside of it.

Running specific files (or directories)

If you want to run just a single file or a set of files, or a directory of files, simply pass them on the command line:

$ specdown specdown/test.markdown
$ specdown specdown/unit_tests specdown/simple.markdown specdown/integration_tests/

Overriding the default root directory

You can use the -r flag to specify the root of the specdown directory (it defaults to "specdown/").

$ specdown test.markdown -r specdown_environment/

Colorization

By default, specdown will output colorized terminal output. If you'd rather the output not be colorized, you can use the -n or --non-colorized switch:

$ specdown -n

You can also turn off colorization in your env.rb by setting the reporter to Specdown::TerminalReporter:

Specdown::Config.reporter = Specdown::TerminalReporter

The reporter defaults to Specdown::ColorTerminalReporter.

Report format: short or condensed

Currently, we offer two report formats: short and condensed. Short offers only the most basic information, whereas condensed will provide you with summary details per file.

You can toggle between the two either by setting switches at the command line:

$ specdown -f short
$ specdown --format=short
$ specdown -f condensed
$ specdown --format=condensed

You can also configure this in your env.rb by setting Specdown::Config.format to either :short or :condensed:

Specdown::Config.format = :short

The default is :condensed.

LICENSE

This software is public domain. GO WILD