Trinidad

Trinidad allows you to run Rails and/or Rack applications within an embedded Tomcat container. Apache Tomcat (formerly also Jakarta Tomcat) is an open source web server and Servlet container with a long history that dates back to the previous millenia.

Trinidad's goals with bringing Tomcat into JRuby land are mostly the following :

  • flexibility especially in terms of configuration it allows you to tune (almost) everything from a simple trinidad.yml (or .rb) configuration file
  • portability there's no vendor lock-in as we use JRuby::Rack, thus even if you do some Java integration or use it's Rack Servlet extensions you're still able to migrate to a standalone Tomcat or any other Servlet container
  • easy Java integration (just in-case you need it, it's there)
  • extensions such as connection pooling (sharing pools between deployed Rails apps) and (threaded) worker adapters for Resque and Delayed::Job

Installation

$ jruby -S gem install trinidad

Trinidad requires (and supports) JRuby 1.6.8 or later (latest 1.7.x recommended).

Quick Start

$ cd a-rails-app
$ jruby -S trinidad

Setup

If you use Bundler, you might want to add Trinidad to your Gemfile :

gem 'trinidad', :require => nil

However this is not absolutely necessary, you might simply gem install trinidad and than run trinidad - keep in mind a server is not an application dependency.

Rails

Trinidad supports the same Rails version as the JRuby-Rack it founds (or is specified/locked in your Gemfile), which is 2.3, 3.x as well as 4.0 for JRuby-Rack 1.1.x (and the coming 1.2). Merb is not supported.

$ trinidad

or if you prefer to use the Rack handler (e.g. for development) use :

$ rails s trinidad

Please note all configuration options will work using the Rack handler mode, you should usually only use it for development/tests and run trinidad on production.

Sinatra

$ ruby app.rb -s Trinidad

or configure your application to always use Trinidad :

require 'sinatra'
require 'trinidad'

configure do
  set :server, :trinidad
end

Rackup

Trinidad auto-detects a plain-old Rack application (if there's a config.ru) :

$ trinidad

You can as well pass the server name to rackup to start the Rack handler :

$ rackup -s trinidad

Or you can set Trinidad as the default server in your config.ru file :

#\ -s trinidad

Trinidad solves the Rack "chicken-egg" problem when booting from a rackup file the same way as JRuby-Rack (since it boots all applications), that is :

  • if a Bundler Gemfile is detected, it first does a bundle/setup to load rack
  • otherwise the rack (gem) version might be specified using a magic comment in config.ru as # rack.version: ~>1.4.0 (or the latest installed gem is used)

NOTE: We do recommend to use the plain trinidad mode for running apps (in production), since it supports runtime pooling while the "rackup" mode does not, it also provides you with better Java integration possibilities.

Also note that Trinidad does not mimic JRuby-Rack's (1.1.x) backwards compatible behavior of starting a pool for Rails but booting a thread-safe runtime for plain Rack applications by default. Currently, runtime pooling is the default with Trinidad and stays the same no matter the type of the application. We expect this default to (most likely) change in a future version of Trinidad as thread-safe gets more adopted by (stable) releases of Rails 4.0.

Configuration

Trinidad allows you to configure parameters from the command line, the following is a list of the currently supported options (try trinidad -h):

  * -d, --dir ROOT_DIR            =>  web application root directory
  * -e, --env ENVIRONMENT         =>  rack (rails) environment
  * --rackup [RACKUP_FILE]        =>  rackup configuration file
  * --public PUBLIC_DIR           =>  web application public root
  * -c, --context CONTEXT         =>  application context path
  * --monitor MONITOR_FILE        =>  monitor for application re-deploys
  * -t, --threadsafe              =>  force thread-safe mode (use single runtime)
  * --runtimes MIN:MAX            =>  use given number of min/max jruby runtimes
  * -f, --config [CONFIG_FILE]    =>  configuration file
  * --address ADDRESS             =>  host address
  * -p, --port PORT               =>  port to bind to
  * -s, --ssl [SSL_PORT]          =>  enable secure socket layout
  * -a, --ajp [AJP_PORT]          =>  enable the AJP web protocol
  * --java_lib LIB_DIR            =>  contains .jar files used by the app
  * --java_classes CLASSES_DIR    =>  contains java classes used by the app
  * -l, --load EXTENSION_NAMES    =>  load options for extensions
  * --apps_base APPS_BASE_DIR     =>  set applications base directory
  * -g, --log LEVEL               =>  set logging level

You can also specify a default web.xml to configure your web application. By default the server tries to load the file config/web.xml but you can change the path by adding the option default_web_xml within your configuration file.

YAML Configuration

The server can be configured from a .yml file. By default, if a file is not specified, the server tries to load config/trinidad.yml. Within this file you can specify options available on the command line and tune server settings or configure multiple applications to be hosted on the server.

Advanced configuration options are explained in the wiki: http://wiki.github.com/trinidad/trinidad/advanced-configuration

$ jruby -S trinidad --config my_trinidad.yml
---
  port: 4242
  address: 0.0.0.0

Ruby Configuration

As an alternative to the config/trinidad.yml file, a .rb configuration file might be used to setup Trinidad. It follows the same convention as the YAML configuration - the file config/trinidad.rb is loaded by default if exists.

Trinidad.configure do |config|
  config.port = 4242
  config.address = '0.0.0.0'
  #config[:custom] = 'custom'
end

Logging

As you might notice on your first trinidad the server uses standard output :

kares@theborg:~/workspace/trinidad/MegaUpload$ trinidad -p 8000 -e staging
Initializing ProtocolHandler ["http-bio-8000"]
Starting Servlet Engine: Apache Tomcat/7.0.28
Starting ProtocolHandler ["http-bio-8000"]
Context with name [/] has started rolling
Context with name [/] has completed rolling

It also prints warnings and error messages on error output, while application specific log messages (e.g. logs from Rails.logger) always go into the expected file location at log/environment.log.

Application logging performs daily file rolling out of the box and only prints messages to the console while it runs in development mode, that means you won't see any application specific output on the console say in production !

Please note that these logging details as well as the logging format will be configurable with trinidad.yml/.rb within the next 1.4.x release.

If you plan to use a slice of Java with your JRuby and require a logger, consider using ServletContext#log. By default it is setup in a way that logging with ServletContext ends up in the same location as the Rails log. If this is not enough you can still configure a Java logging library e.g. SLF4J, just make sure you tell Trinidad to use it as well, if needed, using the jruby.rack.logging context parameter in web.xml.

Context Configuration

For slightly advanced (and "dirty" XML :)) application configuration Trinidad also supports the exact same context.xml format as Tomcat. Each web app is represented as a context instance and might be configured as such. You do not need to repeat configuring the same parameters you have already setup with the Trinidad configuration. This is meant to be mostly for those familiar with Tomcat internals. Currently the application's context.xml is expected to be located on the class-path under your [classes]/META-INF directory.

Context Doc: http://tomcat.apache.org/tomcat-7.0-doc/config/context.html

Serving Assets

Trinidad uses Tomcat's built-in capabilities to server your public files. We do recommend compiling assets up front and disabling the asset server (in production) if you're using the asset pipeline in a Rails application. If you do not put a web-server such as Apache in front of Trinidad you might want to configure the resource caching (on by default for env != development) for maximum performance e.g. by default it's configured as follows :

---
  public: 
    root: public # same as the above "public: public" setting
    cached: true # enable (in-memory) asset caching on for env != 'development'
    cache_ttl: 5000 # cache TTL in millis (might want to increase this)
    cache_max_size: 10240 # the maximum cache size in kB
    cache_object_max_size: 512 # max size for a cached object (asset) in kB
    #aliases: # allows to "link" other directories into the public root e.g. :
      #/home: /var/local/www

Note that this configuration applies to (server-side) resource caching on top of the "public" file-system. You do not need to worry about client side caching, it is handled out of the box with ETag and Last-Modified headers being set.

You might also "mount" file-system directories as aliases to your resources root to be served by your application (as if they were in the public folder).

NOTE: In development mode if you ever happen to rake assets:precompile make sure to remove your public/assets directory later, otherwise requests such as /assets/application.js?body=1.0 might not hit the Rails runtime.

Hot Deployment

Trinidad supports monitoring a file to reload applications, when the file tmp/restart.txt is updated (e.g. touch tmp/restart.txt), the server reloads the application the monitor file belongs to. This monitor file can be customized with the monitor configuration option.

Since version 1.4.0 Trinidad supports 2 reload strategies :

  • restart (default) synchronous reloading (exposed by Tomcat). This strategy pauses incoming requests while it reloads the application and then serves them once ready (or timeouts if it takes too long). It has been chosen as the default strategy since 1.4.0 due it's more predictable memory requirements.

  • rolling "zero-downtime" (asynchronous) reloading strategy similar to Passenger's rolling reloads. This has been the default since 1.1.0 up till the 1.3.x line. If you use this you should account that your JVM memory requirements might increase quite a lot (esp. if you reload under heavy loads) since requests are being served while there's another version of the application being loaded. Since version 1.4.5 rolling reloads support ....

Configure the reload strategy per web application or globally e.g. :

---
  port: 8080
  environment: production
  reload_strategy: rolling

Virtual Hosts

It's possible to use Trinidad with multiple hosts and load the applications under them automatically. A (virtual) host represents an association of a network name (such as "www.example.com" with the particular server on which Tomcat is running. Please remember that each host must have its applications in a different directory. You can find out more at Tomcat's documentation.

Trinidad.configure do |config|
  config.hosts = {
    # applications path (host app base directory) => host names
    # (first one is the "main" host name, other ones are aliases)
    '/var/www/local/apps' => ['localhost', '127.0.0.1'],
    '/home/trinidad/apps' => 'appshost'
    # NOTE: by default a (default) 'localhost' host is setup
  }
end

Detailed host configuration is also possible using supported host options :

---
  port: 8080
  hosts:
    localhost:
      app_base: /home/trinidad/apps
      auto_deploy: false
      unpackWARs: true

If applications are configured via the web_apps section, the host for each application can be added with the host (or hosts) key, if a specified host does not exists (e.g. not configured or not "localhost") it will be created. If several applications belong to the same host, they are expected to reside under the same parent directory e.g. :

Trinidad.configure do |config|
  config.web_apps = {
    :mock1 => {
      :root_dir => 'rails_apps/mock1',
      :host     => ['rails.virtual.host', 'rails.host']
    },
    :mock2 => {
      :root_dir => 'rails_apps/mock2',
      :host     => 'rails.virtual.host'
    },
    :mock3 => {
      :root_dir => 'rack_apps/mock3',
      :host     => ['rack.virtual.host', 'rack.host']
    }
  }
end

Extensions

Trinidad allows to extend itself with more (not just Tomcat) features using extensions, they're essentially components hooked into Tomcat's life-cycle. Here is a list of the available extensions that are "officially supported" :

You can find further information on how to write extensions in the wiki.

Support

Copyright (c) 2013 Team Trinidad. See LICENSE (http://en.wikipedia.org/wiki/MIT_License) for details.