for support kafka 1.x

fluent-plugin-kafka, a plugin for Fluentd

Build Status

A fluentd plugin to both consume and produce data for Apache Kafka.

TODO: Also, I need to write tests

Installation

Add this line to your application's Gemfile:

gem 'fluent-plugin-kafka'

And then execute:

$ bundle

Or install it yourself as:

$ gem install fluent-plugin-kafka --no-document

If you want to use zookeeper related parameters, you also need to install zookeeper gem. zookeeper gem includes native extension, so development tools are needed, e.g. gcc, make and etc.

Requirements

  • Ruby 2.1 or later
  • Input plugins work with kafka v0.9 or later
  • Output plugins work with kafka v0.8 or later

Usage

Common parameters

SSL authentication

  • ssl_ca_cert
  • ssl_client_cert
  • ssl_client_cert_key
  • ssl_ca_certs_from_system

Set path to SSL related files. See Encryption and Authentication using SSL for more detail.

SASL authentication

with GSSAPI
  • principal
  • keytab

Set principal and path to keytab for SASL/GSSAPI authentication. See Authentication using SASL for more details.

with Plain/SCRAM
  • username
  • password
  • scram_mechanism
  • sasl_over_ssl

Set username, password, scram_mechanism and sasl_over_ssl for SASL/Plain or Scram authentication. See Authentication using SASL for more details.

Input plugin (@type 'kafka')

Consume events by single consumer.

<source>
  @type kafka

  brokers <broker1_host>:<broker1_port>,<broker2_host>:<broker2_port>,..
  topics <listening topics(separate with comma',')>
  format <input text type (text|json|ltsv|msgpack)> :default => json
  message_key <key (Optional, for text format only, default is message)>
  add_prefix <tag prefix (Optional)>
  add_suffix <tag suffix (Optional)>

  # Optionally, you can manage topic offset by using zookeeper
  offset_zookeeper    <zookeer node list (<zookeeper1_host>:<zookeeper1_port>,<zookeeper2_host>:<zookeeper2_port>,..)>
  offset_zk_root_node <offset path in zookeeper> default => '/fluent-plugin-kafka'

  # ruby-kafka consumer options
  max_bytes     (integer) :default => nil (Use default of ruby-kafka)
  max_wait_time (integer) :default => nil (Use default of ruby-kafka)
  min_bytes     (integer) :default => nil (Use default of ruby-kafka)
</source>

Supports a start of processing from the assigned offset for specific topics.

<source>
  @type kafka

  brokers <broker1_host>:<broker1_port>,<broker2_host>:<broker2_port>,..
  format <input text type (text|json|ltsv|msgpack)>
  <topic>
    topic     <listening topic>
    partition <listening partition: default=0>
    offset    <listening start offset: default=-1>
  </topic>
  <topic>
    topic     <listening topic>
    partition <listening partition: default=0>
    offset    <listening start offset: default=-1>
  </topic>
</source>

See also ruby-kafka README for more detailed documentation about ruby-kafka.

Consuming topic name is used for event tag. So when the target topic name is app_event, the tag is app_event. If you want to modify tag, use add_prefix or add_suffix parameters. With add_prefix kafka, the tag is kafka.app_event.

Input plugin (@type 'kafka_group', supports kafka group)

Consume events by kafka consumer group features..

<source>
  @type kafka_group

  brokers <broker1_host>:<broker1_port>,<broker2_host>:<broker2_port>,..
  consumer_group <consumer group name, must set>
  topics <listening topics(separate with comma',')>
  format <input text type (text|json|ltsv|msgpack)> :default => json
  message_key <key (Optional, for text format only, default is message)>
  add_prefix <tag prefix (Optional)>
  add_suffix <tag suffix (Optional)>
  retry_emit_limit <Wait retry_emit_limit x 1s when BuffereQueueLimitError happens. The default is nil and it means waiting until BufferQueueLimitError is resolved>
  use_record_time <If true, replace event time with contents of 'time' field of fetched record>
  time_format <string (Optional when use_record_time is used)>

  # ruby-kafka consumer options
  max_bytes               (integer) :default => 1048576
  max_wait_time           (integer) :default => nil (Use default of ruby-kafka)
  min_bytes               (integer) :default => nil (Use default of ruby-kafka)
  offset_commit_interval  (integer) :default => nil (Use default of ruby-kafka)
  offset_commit_threshold (integer) :default => nil (Use default of ruby-kafka)
  fetcher_max_queue_size  (integer) :default => nil (Use default of ruby-kafka)
  start_from_beginning    (bool)    :default => true
</source>

See also ruby-kafka README for more detailed documentation about ruby-kafka options.

Consuming topic name is used for event tag. So when the target topic name is app_event, the tag is app_event. If you want to modify tag, use add_prefix or add_suffix parameter. With add_prefix kafka, the tag is kafka.app_event.

Buffered output plugin

This plugin uses ruby-kafka producer for writing data. This plugin works with recent kafka versions.

<match app.**>
  @type kafka_buffered

  # Brokers: you can choose either brokers or zookeeper. If you are not familiar with zookeeper, use brokers parameters.
  brokers             <broker1_host>:<broker1_port>,<broker2_host>:<broker2_port>,.. # Set brokers directly
  zookeeper           <zookeeper_host>:<zookeeper_port> # Set brokers via Zookeeper
  zookeeper_path      <broker path in zookeeper> :default => /brokers/ids # Set path in zookeeper for kafka

  topic_key             (string) :default => 'topic'
  partition_key         (string) :default => 'partition'
  partition_key_key     (string) :default => 'partition_key'
  message_key_key       (string) :default => 'message_key'
  default_topic         (string) :default => nil
  default_partition_key (string) :default => nil
  default_message_key   (string) :default => nil
  output_data_type      (json|ltsv|msgpack|attr:<record name>|<formatter name>) :default => json
  output_include_tag    (bool) :default => false
  output_include_time   (bool) :default => false
  exclude_topic_key     (bool) :default => false
  exclude_partition_key (bool) :default => false
  get_kafka_client_log  (bool) :default => false

  # See fluentd document for buffer related parameters: http://docs.fluentd.org/articles/buffer-plugin-overview

  # ruby-kafka producer options
  max_send_retries             (integer)     :default => 1
  required_acks                (integer)     :default => -1
  ack_timeout                  (integer)     :default => nil (Use default of ruby-kafka)
  compression_codec            (gzip|snappy) :default => nil (No compression)
  kafka_agg_max_bytes          (integer)     :default => 4096
  kafka_agg_max_messages       (integer)     :default => nil (No limit)
  max_send_limit_bytes         (integer)     :default => nil (No drop)
  discard_kafka_delivery_failed   (bool)     :default => false (No discard)
  monitoring_list              (array)       :default => []
</match>

<formatter name> of output_data_type uses fluentd's formatter plugins. See formatter article.

ruby-kafka sometimes returns Kafka::DeliveryFailed error without good information. In this case, get_kafka_client_log is useful for identifying the error cause. ruby-kafka's log is routed to fluentd log so you can see ruby-kafka's log in fluentd logs.

Supports following ruby-kafka's producer options.

  • max_send_retries - default: 1 - Number of times to retry sending of messages to a leader.
  • required_acks - default: -1 - The number of acks required per request. If you need flush performance, set lower value, e.g. 1, 2.
  • ack_timeout - default: nil - How long the producer waits for acks. The unit is seconds.
  • compression_codec - default: nil - The codec the producer uses to compress messages.
  • kafka_agg_max_bytes - default: 4096 - Maximum value of total message size to be included in one batch transmission.
  • kafka_agg_max_messages - default: nil - Maximum number of messages to include in one batch transmission.
  • max_send_limit_bytes - default: nil - Max byte size to send message to avoid MessageSizeTooLarge. For example, if you set 1000000(message.max.bytes in kafka), Message more than 1000000 byes will be dropped.
  • discard_kafka_delivery_failed - default: false - discard the record where Kafka::DeliveryFailed occurred
  • monitoring_list - default: [] - library to be used to monitor. statsd and datadog are supported

If you want to know about detail of monitoring, see also https://github.com/zendesk/ruby-kafka#monitoring

See also Kafka::Client for more detailed documentation about ruby-kafka.

This plugin supports compression codec "snappy" also. Install snappy module before you use snappy compression.

$ gem install snappy --no-document

snappy gem uses native extension, so you need to install several packages before. On Ubuntu, need development packages and snappy library.

$ sudo apt-get install build-essential autoconf automake libtool libsnappy-dev

On CentOS 7 installation is also necessary.

$ sudo yum install gcc autoconf automake libtool snappy-devel

Load balancing

Messages will be assigned a partition at random as default by ruby-kafka, but messages with the same partition key will always be assigned to the same partition by setting default_partition_key in config file. If key name partition_key exists in a message, this plugin set its value of partition_key as key.

default_partition_key partition_key behavior
Not set Not exists All messages are assigned a partition at random
Set Not exists All messages are assigned to the specific partition
Not set Exists Messages which have partition_key record are assigned to the specific partition, others are assigned a partition at random
Set Exists Messages which have partition_key record are assigned to the specific partition with parition_key, others are assigned to the specific partition with default_parition_key

If key name message_key exists in a message, this plugin publishes the value of message_key to kafka and can be read by consumers. Same message key will be assigned to all messages by setting default_message_key in config file. If message_key exists and if partition_key is not set explicitly, messsage_key will be used for partitioning.

Output plugin

This plugin is for fluentd v1.0 or later. This will be out_kafka plugin in the future.

<match app.**>
  @type kafka2

  brokers             <broker1_host>:<broker1_port>,<broker2_host>:<broker2_port>,.. # Set brokers directly

  topic_key             (string) :default => 'topic'
  partition_key         (string) :default => 'partition'
  partition_key_key     (string) :default => 'partition_key'
  message_key_key       (string) :default => 'message_key'
  default_topic         (string) :default => nil
  default_partition_key (string) :default => nil
  default_message_key   (string) :default => nil
  exclude_topic_key     (bool) :default => false
  exclude_partition_key (bool) :default => false
  get_kafka_client_log  (bool) :default => false
  use_default_for_unknown_topic (bool) :default => false

  <format>
    @type (json|ltsv|msgpack|attr:<record name>|<formatter name>) :default => json
  </format>
  <inject>
    tag_key tag
    time_key time
  </inject>

  # See fluentd document for buffer related parameters: http://docs.fluentd.org/articles/buffer-plugin-overview
  # Buffer chunk key should be same with topic_key. If value is not found in the record, default_topic is used.
  <buffer topic>
    flush_interval 10s
  </buffer>

  # ruby-kafka producer options
  max_send_retries             (integer)     :default => 1
  required_acks                (integer)     :default => -1
  ack_timeout                  (integer)     :default => nil (Use default of ruby-kafka)
  compression_codec            (gzip|snappy) :default => nil (No compression)
</match>

Non-buffered output plugin

This plugin uses ruby-kafka producer for writing data. For performance and reliability concerns, use kafka_bufferd output instead. This is mainly for testing.

<match app.**>
  @type kafka

  # Brokers: you can choose either brokers or zookeeper.
  brokers        <broker1_host>:<broker1_port>,<broker2_host>:<broker2_port>,.. # Set brokers directly
  zookeeper      <zookeeper_host>:<zookeeper_port> # Set brokers via Zookeeper
  zookeeper_path <broker path in zookeeper> :default => /brokers/ids # Set path in zookeeper for kafka

  default_topic         (string) :default => nil
  default_partition_key (string) :default => nil
  default_message_key   (string) :default => nil
  output_data_type      (json|ltsv|msgpack|attr:<record name>|<formatter name>) :default => json
  output_include_tag    (bool) :default => false
  output_include_time   (bool) :default => false
  exclude_topic_key     (bool) :default => false
  exclude_partition_key (bool) :default => false

  # ruby-kafka producer options
  max_send_retries    (integer)     :default => 1
  required_acks       (integer)     :default => -1
  ack_timeout         (integer)     :default => nil (Use default of ruby-kafka)
  compression_codec   (gzip|snappy) :default => nil
  max_buffer_size     (integer)     :default => nil (Use default of ruby-kafka)
  max_buffer_bytesize (integer)     :default => nil (Use default of ruby-kafka)
</match>

This plugin also supports ruby-kafka related parameters. See Buffered output plugin section.

rdkafka based output plugin

This plugin uses rdkafka instead of ruby-kafka for ruby client. You need to install rdkafka gem.

# rdkafka is C extension library so need development tools like ruby-devel, gcc and etc
$ gem install rdkafka --no-document

<match kafka.**>
  @type rdkafka

  default_topic kafka
  flush_interval 1s
  output_data_type json

  rdkafka_options {
    "log_level" : 7
  }
</match>

Contributing

  1. Fork it
  2. Create your feature branch (git checkout -b my-new-feature)
  3. Commit your changes (git commit -am 'Added some feature')
  4. Push to the branch (git push origin my-new-feature)
  5. Create new Pull Request