Class: Aws::Route53::Types::UpdateHealthCheckRequest

Inherits:

Struct

Object
Struct
Aws::Route53::Types::UpdateHealthCheckRequest

show all

Includes:: Structure

Defined in:: lib/aws-sdk-route53/types.rb

Overview

A complex type that contains information about a request to update a health check.

Constant Summary collapse

SENSITIVE =

[]

Instance Attribute Summary collapse

#alarm_identifier ⇒ Types::AlarmIdentifier

A complex type that identifies the CloudWatch alarm that you want Amazon Route 53 health checkers to use to determine whether the specified health check is healthy.
#child_health_checks ⇒ Array<String>

A complex type that contains one ‘ChildHealthCheck` element for each health check that you want to associate with a `CALCULATED` health check.
#disabled ⇒ Boolean

Stops Route 53 from performing health checks.
#enable_sni ⇒ Boolean

Specify whether you want Amazon Route 53 to send the value of ‘FullyQualifiedDomainName` to the endpoint in the `client_hello` message during `TLS` negotiation.
#failure_threshold ⇒ Integer

The number of consecutive health checks that an endpoint must pass or fail for Amazon Route 53 to change the current status of the endpoint from unhealthy to healthy or vice versa.
#fully_qualified_domain_name ⇒ String

Amazon Route 53 behavior depends on whether you specify a value for ‘IPAddress`.
#health_check_id ⇒ String

The ID for the health check for which you want detailed information.
#health_check_version ⇒ Integer

A sequential counter that Amazon Route 53 sets to ‘1` when you create a health check and increments by 1 each time you update settings for the health check.
#health_threshold ⇒ Integer

The number of child health checks that are associated with a ‘CALCULATED` health that Amazon Route 53 must consider healthy for the `CALCULATED` health check to be considered healthy.
#insufficient_data_health_status ⇒ String

When CloudWatch has insufficient data about the metric to determine the alarm state, the status that you want Amazon Route 53 to assign to the health check:.
#inverted ⇒ Boolean

Specify whether you want Amazon Route 53 to invert the status of a health check, for example, to consider a health check unhealthy when it otherwise would be considered healthy.
#ip_address ⇒ String

The IPv4 or IPv6 IP address for the endpoint that you want Amazon Route 53 to perform health checks on.
#port ⇒ Integer

The port on the endpoint that you want Amazon Route 53 to perform health checks on.
#regions ⇒ Array<String>

A complex type that contains one ‘Region` element for each region that you want Amazon Route 53 health checkers to check the specified endpoint from.
#reset_elements ⇒ Array<String>

A complex type that contains one ‘ResettableElementName` element for each element that you want to reset to the default value.
#resource_path ⇒ String

The path that you want Amazon Route 53 to request when performing health checks.
#search_string ⇒ String

If the value of ‘Type` is `HTTP_STR_MATCH` or `HTTPS_STR_MATCH`, the string that you want Amazon Route 53 to search for in the response body from the specified resource.

Instance Attribute Details

#alarm_identifier ⇒ `Types::AlarmIdentifier`

A complex type that identifies the CloudWatch alarm that you want Amazon Route 53 health checkers to use to determine whether the specified health check is healthy.

Returns:

(Types::AlarmIdentifier)

# File 'lib/aws-sdk-route53/types.rb', line 7875

class UpdateHealthCheckRequest < Struct.new(
  :health_check_id,
  :health_check_version,
  :ip_address,
  :port,
  :resource_path,
  :fully_qualified_domain_name,
  :search_string,
  :failure_threshold,
  :inverted,
  :disabled,
  :health_threshold,
  :child_health_checks,
  :enable_sni,
  :regions,
  :alarm_identifier,
  :insufficient_data_health_status,
  :reset_elements)
  SENSITIVE = []
  include Aws::Structure
end

#child_health_checks ⇒ `Array<String>`

A complex type that contains one ‘ChildHealthCheck` element for each health check that you want to associate with a `CALCULATED` health check.

Returns:

(Array<String>)

# File 'lib/aws-sdk-route53/types.rb', line 7875

class UpdateHealthCheckRequest < Struct.new(
  :health_check_id,
  :health_check_version,
  :ip_address,
  :port,
  :resource_path,
  :fully_qualified_domain_name,
  :search_string,
  :failure_threshold,
  :inverted,
  :disabled,
  :health_threshold,
  :child_health_checks,
  :enable_sni,
  :regions,
  :alarm_identifier,
  :insufficient_data_health_status,
  :reset_elements)
  SENSITIVE = []
  include Aws::Structure
end

#disabled ⇒ `Boolean`

Stops Route 53 from performing health checks. When you disable a health check, here’s what happens:

**Health checks that check the health of endpoints:** Route 53 stops submitting requests to your application, server, or other resource.
**Calculated health checks:** Route 53 stops aggregating the status of the referenced health checks.
**Health checks that monitor CloudWatch alarms:** Route 53 stops monitoring the corresponding CloudWatch metrics.

After you disable a health check, Route 53 considers the status of the health check to always be healthy. If you configured DNS failover, Route 53 continues to route traffic to the corresponding resources. If you want to stop routing traffic to a resource, change the value of [Inverted].

Charges for a health check still apply when the health check is disabled. For more information, see [Amazon Route 53 Pricing].

[1]: docs.aws.amazon.com/Route53/latest/APIReference/API_UpdateHealthCheck.html#Route53-UpdateHealthCheck-request-Inverted [2]: aws.amazon.com/route53/pricing/

Returns:

(Boolean)

# File 'lib/aws-sdk-route53/types.rb', line 7875

class UpdateHealthCheckRequest < Struct.new(
  :health_check_id,
  :health_check_version,
  :ip_address,
  :port,
  :resource_path,
  :fully_qualified_domain_name,
  :search_string,
  :failure_threshold,
  :inverted,
  :disabled,
  :health_threshold,
  :child_health_checks,
  :enable_sni,
  :regions,
  :alarm_identifier,
  :insufficient_data_health_status,
  :reset_elements)
  SENSITIVE = []
  include Aws::Structure
end

#enable_sni ⇒ `Boolean`

Specify whether you want Amazon Route 53 to send the value of ‘FullyQualifiedDomainName` to the endpoint in the `client_hello` message during `TLS` negotiation. This allows the endpoint to respond to `HTTPS` health check requests with the applicable SSL/TLS certificate.

Some endpoints require that HTTPS requests include the host name in the ‘client_hello` message. If you don’t enable SNI, the status of the health check will be SSL alert ‘handshake_failure`. A health check can also have that status for other reasons. If SNI is enabled and you’re still getting the error, check the SSL/TLS configuration on your endpoint and confirm that your certificate is valid.

The SSL/TLS certificate on your endpoint includes a domain name in the ‘Common Name` field and possibly several more in the `Subject Alternative Names` field. One of the domain names in the certificate should match the value that you specify for `FullyQualifiedDomainName`. If the endpoint responds to the `client_hello` message with a certificate that does not include the domain name that you specified in `FullyQualifiedDomainName`, a health checker will retry the handshake. In the second attempt, the health checker will omit `FullyQualifiedDomainName` from the `client_hello` message.

Returns:

(Boolean)

# File 'lib/aws-sdk-route53/types.rb', line 7875

class UpdateHealthCheckRequest < Struct.new(
  :health_check_id,
  :health_check_version,
  :ip_address,
  :port,
  :resource_path,
  :fully_qualified_domain_name,
  :search_string,
  :failure_threshold,
  :inverted,
  :disabled,
  :health_threshold,
  :child_health_checks,
  :enable_sni,
  :regions,
  :alarm_identifier,
  :insufficient_data_health_status,
  :reset_elements)
  SENSITIVE = []
  include Aws::Structure
end

#failure_threshold ⇒ `Integer`

The number of consecutive health checks that an endpoint must pass or fail for Amazon Route 53 to change the current status of the endpoint from unhealthy to healthy or vice versa. For more information, see [How Amazon Route 53 Determines Whether an Endpoint Is Healthy] in the *Amazon Route 53 Developer Guide*.

If you don’t specify a value for ‘FailureThreshold`, the default value is three health checks.

[1]: docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html

Returns:

(Integer)

# File 'lib/aws-sdk-route53/types.rb', line 7875

class UpdateHealthCheckRequest < Struct.new(
  :health_check_id,
  :health_check_version,
  :ip_address,
  :port,
  :resource_path,
  :fully_qualified_domain_name,
  :search_string,
  :failure_threshold,
  :inverted,
  :disabled,
  :health_threshold,
  :child_health_checks,
  :enable_sni,
  :regions,
  :alarm_identifier,
  :insufficient_data_health_status,
  :reset_elements)
  SENSITIVE = []
  include Aws::Structure
end

#fully_qualified_domain_name ⇒ `String`

Amazon Route 53 behavior depends on whether you specify a value for ‘IPAddress`.

<note markdown=“1”> If a health check already has a value for ‘IPAddress`, you can change the value. However, you can’t update an existing health check to add or remove the value of ‘IPAddress`.

</note>

**If you specify a value for** ‘IPAddress`:

Route 53 sends health check requests to the specified IPv4 or IPv6 address and passes the value of ‘FullyQualifiedDomainName` in the `Host` header for all health checks except TCP health checks. This is typically the fully qualified DNS name of the endpoint on which you want Route 53 to perform health checks.

When Route 53 checks the health of an endpoint, here is how it constructs the ‘Host` header:

If you specify a value of ‘80` for `Port` and `HTTP` or `HTTP_STR_MATCH` for `Type`, Route 53 passes the value of `FullyQualifiedDomainName` to the endpoint in the `Host` header.
If you specify a value of ‘443` for `Port` and `HTTPS` or `HTTPS_STR_MATCH` for `Type`, Route 53 passes the value of `FullyQualifiedDomainName` to the endpoint in the `Host` header.
If you specify another value for ‘Port` and any value except `TCP` for `Type`, Route 53 passes FullyQualifiedDomainName:Port to the endpoint in the `Host` header.

If you don’t specify a value for ‘FullyQualifiedDomainName`, Route 53 substitutes the value of `IPAddress` in the `Host` header in each of the above cases.

**If you don’t specify a value for** ‘IPAddress`:

If you don’t specify a value for ‘IPAddress`, Route 53 sends a DNS request to the domain that you specify in `FullyQualifiedDomainName` at the interval you specify in `RequestInterval`. Using an IPv4 address that is returned by DNS, Route 53 then checks the health of the endpoint.

If you don’t specify a value for ‘IPAddress`, you can’t update the health check to remove the `FullyQualifiedDomainName`; if you don’t specify a value for `IPAddress` on creation, a `FullyQualifiedDomainName` is required.

<note markdown=“1”> If you don’t specify a value for ‘IPAddress`, Route 53 uses only IPv4 to send health checks to the endpoint. If there’s no resource record set with a type of A for the name that you specify for ‘FullyQualifiedDomainName`, the health check fails with a “DNS resolution failed” error.

</note>

If you want to check the health of weighted, latency, or failover resource record sets and you choose to specify the endpoint only by ‘FullyQualifiedDomainName`, we recommend that you create a separate health check for each endpoint. For example, create a health check for each HTTP server that is serving content for www.example.com. For the value of `FullyQualifiedDomainName`, specify the domain name of the server (such as `us-east-2-www.example.com`), not the name of the resource record sets (www.example.com).

In this configuration, if the value of ‘FullyQualifiedDomainName` matches the name of the resource record sets and you then associate the health check with those resource record sets, health check results will be unpredictable.

In addition, if the value of ‘Type` is `HTTP`, `HTTPS`, `HTTP_STR_MATCH`, or `HTTPS_STR_MATCH`, Route 53 passes the value of `FullyQualifiedDomainName` in the `Host` header, as it does when you specify a value for `IPAddress`. If the value of `Type` is `TCP`, Route 53 doesn’t pass a ‘Host` header.

Returns:

(String)

# File 'lib/aws-sdk-route53/types.rb', line 7875

class UpdateHealthCheckRequest < Struct.new(
  :health_check_id,
  :health_check_version,
  :ip_address,
  :port,
  :resource_path,
  :fully_qualified_domain_name,
  :search_string,
  :failure_threshold,
  :inverted,
  :disabled,
  :health_threshold,
  :child_health_checks,
  :enable_sni,
  :regions,
  :alarm_identifier,
  :insufficient_data_health_status,
  :reset_elements)
  SENSITIVE = []
  include Aws::Structure
end

#health_check_id ⇒ `String`

The ID for the health check for which you want detailed information. When you created the health check, ‘CreateHealthCheck` returned the ID in the response, in the `HealthCheckId` element.

Returns:

(String)

# File 'lib/aws-sdk-route53/types.rb', line 7875

class UpdateHealthCheckRequest < Struct.new(
  :health_check_id,
  :health_check_version,
  :ip_address,
  :port,
  :resource_path,
  :fully_qualified_domain_name,
  :search_string,
  :failure_threshold,
  :inverted,
  :disabled,
  :health_threshold,
  :child_health_checks,
  :enable_sni,
  :regions,
  :alarm_identifier,
  :insufficient_data_health_status,
  :reset_elements)
  SENSITIVE = []
  include Aws::Structure
end

#health_check_version ⇒ `Integer`

A sequential counter that Amazon Route 53 sets to ‘1` when you create a health check and increments by 1 each time you update settings for the health check.

We recommend that you use ‘GetHealthCheck` or `ListHealthChecks` to get the current value of `HealthCheckVersion` for the health check that you want to update, and that you include that value in your `UpdateHealthCheck` request. This prevents Route 53 from overwriting an intervening update:

If the value in the ‘UpdateHealthCheck` request matches the value of `HealthCheckVersion` in the health check, Route 53 updates the health check with the new settings.
If the value of ‘HealthCheckVersion` in the health check is greater, the health check was changed after you got the version number. Route 53 does not update the health check, and it returns a `HealthCheckVersionMismatch` error.

Returns:

(Integer)

# File 'lib/aws-sdk-route53/types.rb', line 7875

class UpdateHealthCheckRequest < Struct.new(
  :health_check_id,
  :health_check_version,
  :ip_address,
  :port,
  :resource_path,
  :fully_qualified_domain_name,
  :search_string,
  :failure_threshold,
  :inverted,
  :disabled,
  :health_threshold,
  :child_health_checks,
  :enable_sni,
  :regions,
  :alarm_identifier,
  :insufficient_data_health_status,
  :reset_elements)
  SENSITIVE = []
  include Aws::Structure
end

#health_threshold ⇒ `Integer`

The number of child health checks that are associated with a ‘CALCULATED` health that Amazon Route 53 must consider healthy for the `CALCULATED` health check to be considered healthy. To specify the child health checks that you want to associate with a `CALCULATED` health check, use the `ChildHealthChecks` and `ChildHealthCheck` elements.

Note the following:

If you specify a number greater than the number of child health checks, Route 53 always considers this health check to be unhealthy.
If you specify ‘0`, Route 53 always considers this health check to be healthy.

Returns:

(Integer)

# File 'lib/aws-sdk-route53/types.rb', line 7875

class UpdateHealthCheckRequest < Struct.new(
  :health_check_id,
  :health_check_version,
  :ip_address,
  :port,
  :resource_path,
  :fully_qualified_domain_name,
  :search_string,
  :failure_threshold,
  :inverted,
  :disabled,
  :health_threshold,
  :child_health_checks,
  :enable_sni,
  :regions,
  :alarm_identifier,
  :insufficient_data_health_status,
  :reset_elements)
  SENSITIVE = []
  include Aws::Structure
end

#insufficient_data_health_status ⇒ `String`

When CloudWatch has insufficient data about the metric to determine the alarm state, the status that you want Amazon Route 53 to assign to the health check:

‘Healthy`: Route 53 considers the health check to be healthy.
‘Unhealthy`: Route 53 considers the health check to be unhealthy.
‘LastKnownStatus`: By default, Route 53 uses the status of the health check from the last time CloudWatch had sufficient data to determine the alarm state. For new health checks that have no last known status, the status for the health check is healthy.

Returns:

(String)

# File 'lib/aws-sdk-route53/types.rb', line 7875

class UpdateHealthCheckRequest < Struct.new(
  :health_check_id,
  :health_check_version,
  :ip_address,
  :port,
  :resource_path,
  :fully_qualified_domain_name,
  :search_string,
  :failure_threshold,
  :inverted,
  :disabled,
  :health_threshold,
  :child_health_checks,
  :enable_sni,
  :regions,
  :alarm_identifier,
  :insufficient_data_health_status,
  :reset_elements)
  SENSITIVE = []
  include Aws::Structure
end

#inverted ⇒ `Boolean`

Specify whether you want Amazon Route 53 to invert the status of a health check, for example, to consider a health check unhealthy when it otherwise would be considered healthy.

Returns:

(Boolean)

# File 'lib/aws-sdk-route53/types.rb', line 7875

class UpdateHealthCheckRequest < Struct.new(
  :health_check_id,
  :health_check_version,
  :ip_address,
  :port,
  :resource_path,
  :fully_qualified_domain_name,
  :search_string,
  :failure_threshold,
  :inverted,
  :disabled,
  :health_threshold,
  :child_health_checks,
  :enable_sni,
  :regions,
  :alarm_identifier,
  :insufficient_data_health_status,
  :reset_elements)
  SENSITIVE = []
  include Aws::Structure
end

#ip_address ⇒ `String`

The IPv4 or IPv6 IP address for the endpoint that you want Amazon Route 53 to perform health checks on. If you don’t specify a value for ‘IPAddress`, Route 53 sends a DNS request to resolve the domain name that you specify in `FullyQualifiedDomainName` at the interval that you specify in `RequestInterval`. Using an IP address that is returned by DNS, Route 53 then checks the health of the endpoint.

Use one of the following formats for the value of ‘IPAddress`:

**IPv4 address**: four values between 0 and 255, separated by periods (.), for example, ‘192.0.2.44`.
**IPv6 address**: eight groups of four hexadecimal values, separated by colons (:), for example, ‘2001:0db8:85a3:0000:0000:abcd:0001:2345`. You can also shorten IPv6 addresses as described in RFC 5952, for example, `2001:db8:85a3::abcd:1:2345`.

If the endpoint is an EC2 instance, we recommend that you create an Elastic IP address, associate it with your EC2 instance, and specify the Elastic IP address for ‘IPAddress`. This ensures that the IP address of your instance never changes. For more information, see the applicable documentation:

Linux: [Elastic IP Addresses (EIP)] in the *Amazon EC2 User Guide for Linux Instances*
Windows: [Elastic IP Addresses (EIP)] in the *Amazon EC2 User Guide for Windows Instances*

</note>

For more information, see [FullyQualifiedDomainName].

Constraints: Route 53 can’t check the health of endpoints for which the IP address is in local, private, non-routable, or multicast ranges. For more information about IP addresses for which you can’t create health checks, see the following documents:

RFC 5735, Special Use IPv4 Addresses][4
RFC 6598, IANA-Reserved IPv4 Prefix for Shared Address Space][5
RFC 5156, Special-Use IPv6 Addresses][6

[1]: docs.aws.amazon.com/AWSEC2/latest/UserGuide/elastic-ip-addresses-eip.html [2]: docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/elastic-ip-addresses-eip.html [3]: docs.aws.amazon.com/Route53/latest/APIReference/API_UpdateHealthCheck.html#Route53-UpdateHealthCheck-request-FullyQualifiedDomainName [4]: tools.ietf.org/html/rfc5735 [5]: tools.ietf.org/html/rfc6598 [6]: tools.ietf.org/html/rfc5156

Returns:

(String)

# File 'lib/aws-sdk-route53/types.rb', line 7875

class UpdateHealthCheckRequest < Struct.new(
  :health_check_id,
  :health_check_version,
  :ip_address,
  :port,
  :resource_path,
  :fully_qualified_domain_name,
  :search_string,
  :failure_threshold,
  :inverted,
  :disabled,
  :health_threshold,
  :child_health_checks,
  :enable_sni,
  :regions,
  :alarm_identifier,
  :insufficient_data_health_status,
  :reset_elements)
  SENSITIVE = []
  include Aws::Structure
end

#port ⇒ `Integer`

The port on the endpoint that you want Amazon Route 53 to perform health checks on.

<note markdown=“1”> Don’t specify a value for ‘Port` when you specify a value for `Type` of `CLOUDWATCH_METRIC` or `CALCULATED`.

</note>

Returns:

(Integer)

# File 'lib/aws-sdk-route53/types.rb', line 7875

class UpdateHealthCheckRequest < Struct.new(
  :health_check_id,
  :health_check_version,
  :ip_address,
  :port,
  :resource_path,
  :fully_qualified_domain_name,
  :search_string,
  :failure_threshold,
  :inverted,
  :disabled,
  :health_threshold,
  :child_health_checks,
  :enable_sni,
  :regions,
  :alarm_identifier,
  :insufficient_data_health_status,
  :reset_elements)
  SENSITIVE = []
  include Aws::Structure
end

#regions ⇒ `Array<String>`

A complex type that contains one ‘Region` element for each region that you want Amazon Route 53 health checkers to check the specified endpoint from.

Returns:

(Array<String>)

# File 'lib/aws-sdk-route53/types.rb', line 7875

class UpdateHealthCheckRequest < Struct.new(
  :health_check_id,
  :health_check_version,
  :ip_address,
  :port,
  :resource_path,
  :fully_qualified_domain_name,
  :search_string,
  :failure_threshold,
  :inverted,
  :disabled,
  :health_threshold,
  :child_health_checks,
  :enable_sni,
  :regions,
  :alarm_identifier,
  :insufficient_data_health_status,
  :reset_elements)
  SENSITIVE = []
  include Aws::Structure
end

#reset_elements ⇒ `Array<String>`

A complex type that contains one ‘ResettableElementName` element for each element that you want to reset to the default value. Valid values for `ResettableElementName` include the following:

‘ChildHealthChecks`: Amazon Route 53 resets [ChildHealthChecks] to null.
‘FullyQualifiedDomainName`: Route 53 resets [FullyQualifiedDomainName]. to null.
‘Regions`: Route 53 resets the [Regions] list to the default set of regions.
‘ResourcePath`: Route 53 resets [ResourcePath] to null.

[1]: docs.aws.amazon.com/Route53/latest/APIReference/API_HealthCheckConfig.html#Route53-Type-HealthCheckConfig-ChildHealthChecks [2]: docs.aws.amazon.com/Route53/latest/APIReference/API_UpdateHealthCheck.html#Route53-UpdateHealthCheck-request-FullyQualifiedDomainName [3]: docs.aws.amazon.com/Route53/latest/APIReference/API_HealthCheckConfig.html#Route53-Type-HealthCheckConfig-Regions [4]: docs.aws.amazon.com/Route53/latest/APIReference/API_HealthCheckConfig.html#Route53-Type-HealthCheckConfig-ResourcePath

Returns:

(Array<String>)

# File 'lib/aws-sdk-route53/types.rb', line 7875

class UpdateHealthCheckRequest < Struct.new(
  :health_check_id,
  :health_check_version,
  :ip_address,
  :port,
  :resource_path,
  :fully_qualified_domain_name,
  :search_string,
  :failure_threshold,
  :inverted,
  :disabled,
  :health_threshold,
  :child_health_checks,
  :enable_sni,
  :regions,
  :alarm_identifier,
  :insufficient_data_health_status,
  :reset_elements)
  SENSITIVE = []
  include Aws::Structure
end

#resource_path ⇒ `String`

The path that you want Amazon Route 53 to request when performing health checks. The path can be any value for which your endpoint will return an HTTP status code of 2xx or 3xx when the endpoint is healthy, for example the file /docs/route53-health-check.html. You can also include query string parameters, for example, ‘/welcome.html?language=jp&login=y`.

Specify this value only if you want to change it.

Returns:

(String)

# File 'lib/aws-sdk-route53/types.rb', line 7875

class UpdateHealthCheckRequest < Struct.new(
  :health_check_id,
  :health_check_version,
  :ip_address,
  :port,
  :resource_path,
  :fully_qualified_domain_name,
  :search_string,
  :failure_threshold,
  :inverted,
  :disabled,
  :health_threshold,
  :child_health_checks,
  :enable_sni,
  :regions,
  :alarm_identifier,
  :insufficient_data_health_status,
  :reset_elements)
  SENSITIVE = []
  include Aws::Structure
end

#search_string ⇒ `String`

If the value of ‘Type` is `HTTP_STR_MATCH` or `HTTPS_STR_MATCH`, the string that you want Amazon Route 53 to search for in the response body from the specified resource. If the string appears in the response body, Route 53 considers the resource healthy. (You can’t change the value of ‘Type` when you update a health check.)

Returns:

(String)

# File 'lib/aws-sdk-route53/types.rb', line 7875

class UpdateHealthCheckRequest < Struct.new(
  :health_check_id,
  :health_check_version,
  :ip_address,
  :port,
  :resource_path,
  :fully_qualified_domain_name,
  :search_string,
  :failure_threshold,
  :inverted,
  :disabled,
  :health_threshold,
  :child_health_checks,
  :enable_sni,
  :regions,
  :alarm_identifier,
  :insufficient_data_health_status,
  :reset_elements)
  SENSITIVE = []
  include Aws::Structure
end

Class: Aws::Route53::Types::UpdateHealthCheckRequest

Overview

Constant Summary collapse

Instance Attribute Summary collapse

Instance Attribute Details

#alarm_identifier ⇒ Types::AlarmIdentifier

#child_health_checks ⇒ Array<String>

#disabled ⇒ Boolean

#enable_sni ⇒ Boolean

#failure_threshold ⇒ Integer

#fully_qualified_domain_name ⇒ String

#health_check_id ⇒ String

#health_check_version ⇒ Integer

#health_threshold ⇒ Integer

#insufficient_data_health_status ⇒ String

#inverted ⇒ Boolean

#ip_address ⇒ String

#port ⇒ Integer

#regions ⇒ Array<String>

#reset_elements ⇒ Array<String>

#resource_path ⇒ String

#search_string ⇒ String

#alarm_identifier ⇒ `Types::AlarmIdentifier`

#child_health_checks ⇒ `Array<String>`

#disabled ⇒ `Boolean`

#enable_sni ⇒ `Boolean`

#failure_threshold ⇒ `Integer`

#fully_qualified_domain_name ⇒ `String`

#health_check_id ⇒ `String`

#health_check_version ⇒ `Integer`

#health_threshold ⇒ `Integer`

#insufficient_data_health_status ⇒ `String`

#inverted ⇒ `Boolean`

#ip_address ⇒ `String`

#port ⇒ `Integer`

#regions ⇒ `Array<String>`

#reset_elements ⇒ `Array<String>`

#resource_path ⇒ `String`

#search_string ⇒ `String`