Class: OCI::Core::Models::EgressSecurityRule
- Inherits:
-
Object
- Object
- OCI::Core::Models::EgressSecurityRule
- Defined in:
- lib/oci/core/models/egress_security_rule.rb
Overview
A rule for allowing outbound IP packets.
Constant Summary collapse
- DESTINATION_TYPE_ENUM =
[ DESTINATION_TYPE_CIDR_BLOCK = 'CIDR_BLOCK'.freeze, DESTINATION_TYPE_SERVICE_CIDR_BLOCK = 'SERVICE_CIDR_BLOCK'.freeze, DESTINATION_TYPE_UNKNOWN_ENUM_VALUE = 'UNKNOWN_ENUM_VALUE'.freeze ].freeze
Instance Attribute Summary collapse
-
#destination ⇒ String
[Required] Conceptually, this is the range of IP addresses that a packet originating from the instance can go to.
-
#destination_type ⇒ String
Type of destination for the rule.
-
#icmp_options ⇒ OCI::Core::Models::IcmpOptions
Optional and valid only for ICMP and ICMPv6.
-
#is_stateless ⇒ BOOLEAN
A stateless rule allows traffic in one direction.
-
#protocol ⇒ String
[Required] The transport protocol.
-
#tcp_options ⇒ OCI::Core::Models::TcpOptions
Optional and valid only for TCP.
-
#udp_options ⇒ OCI::Core::Models::UdpOptions
Optional and valid only for UDP.
Class Method Summary collapse
-
.attribute_map ⇒ Object
Attribute mapping from ruby-style variable name to JSON key.
-
.swagger_types ⇒ Object
Attribute type mapping.
Instance Method Summary collapse
-
#==(other) ⇒ Object
Checks equality by comparing each attribute.
-
#build_from_hash(attributes) ⇒ Object
Builds the object from hash.
- #eql?(other) ⇒ Boolean
-
#hash ⇒ Fixnum
Calculates hash code according to all attributes.
-
#initialize(attributes = {}) ⇒ EgressSecurityRule
constructor
Initializes the object.
-
#to_hash ⇒ Hash
Returns the object in the form of hash.
-
#to_s ⇒ String
Returns the string representation of the object.
Constructor Details
#initialize(attributes = {}) ⇒ EgressSecurityRule
Initializes the object
130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 |
# File 'lib/oci/core/models/egress_security_rule.rb', line 130 def initialize(attributes = {}) return unless attributes.is_a?(Hash) # convert string to symbol for hash key attributes = attributes.each_with_object({}) { |(k, v), h| h[k.to_sym] = v } self.destination = attributes[:'destination'] if attributes[:'destination'] self.destination_type = attributes[:'destinationType'] if attributes[:'destinationType'] self.destination_type = "CIDR_BLOCK" if destination_type.nil? && !attributes.key?(:'destinationType') # rubocop:disable Style/StringLiterals raise 'You cannot provide both :destinationType and :destination_type' if attributes.key?(:'destinationType') && attributes.key?(:'destination_type') self.destination_type = attributes[:'destination_type'] if attributes[:'destination_type'] self.destination_type = "CIDR_BLOCK" if destination_type.nil? && !attributes.key?(:'destinationType') && !attributes.key?(:'destination_type') # rubocop:disable Style/StringLiterals self. = attributes[:'icmpOptions'] if attributes[:'icmpOptions'] raise 'You cannot provide both :icmpOptions and :icmp_options' if attributes.key?(:'icmpOptions') && attributes.key?(:'icmp_options') self. = attributes[:'icmp_options'] if attributes[:'icmp_options'] self.is_stateless = attributes[:'isStateless'] unless attributes[:'isStateless'].nil? raise 'You cannot provide both :isStateless and :is_stateless' if attributes.key?(:'isStateless') && attributes.key?(:'is_stateless') self.is_stateless = attributes[:'is_stateless'] unless attributes[:'is_stateless'].nil? self.protocol = attributes[:'protocol'] if attributes[:'protocol'] self. = attributes[:'tcpOptions'] if attributes[:'tcpOptions'] raise 'You cannot provide both :tcpOptions and :tcp_options' if attributes.key?(:'tcpOptions') && attributes.key?(:'tcp_options') self. = attributes[:'tcp_options'] if attributes[:'tcp_options'] self. = attributes[:'udpOptions'] if attributes[:'udpOptions'] raise 'You cannot provide both :udpOptions and :udp_options' if attributes.key?(:'udpOptions') && attributes.key?(:'udp_options') self. = attributes[:'udp_options'] if attributes[:'udp_options'] end |
Instance Attribute Details
#destination ⇒ String
[Required] Conceptually, this is the range of IP addresses that a packet originating from the instance can go to.
Allowed values:
* IP address range in CIDR notation. For example: `192.168.1.0/24` or `2001:0db8:0123:45::/56`
* The `cidrBlock` value for a {Service}, if you're
setting up a security list rule for traffic destined for a particular `Service` through
a service gateway. For example: `oci-phx-objectstorage`.
28 29 30 |
# File 'lib/oci/core/models/egress_security_rule.rb', line 28 def destination @destination end |
#destination_type ⇒ String
Type of destination for the rule. The default is ‘CIDR_BLOCK`.
Allowed values:
* `CIDR_BLOCK`: If the rule's `destination` is an IP address range in CIDR notation.
* `SERVICE_CIDR_BLOCK`: If the rule's `destination` is the `cidrBlock` value for a
{Service} (the rule is for traffic destined for a
particular `Service` through a service gateway).
41 42 43 |
# File 'lib/oci/core/models/egress_security_rule.rb', line 41 def destination_type @destination_type end |
#icmp_options ⇒ OCI::Core::Models::IcmpOptions
Optional and valid only for ICMP and ICMPv6. Use to specify a particular ICMP type and code as defined in:
-
[ICMP Parameters](www.iana.org/assignments/icmp-parameters/icmp-parameters.xhtml)
-
[ICMPv6 Parameters](www.iana.org/assignments/icmpv6-parameters/icmpv6-parameters.xhtml)
If you specify ICMP or ICMPv6 as the protocol but omit this object, then all ICMP types and codes are allowed. If you do provide this object, the type is required and the code is optional. To enable MTU negotiation for ingress internet traffic via IPv4, make sure to allow type 3 ("Destination Unreachable") code 4 ("Fragmentation Needed and Don’t Fragment was Set"). If you need to specify multiple codes for a single type, create a separate security list rule for each.
56 57 58 |
# File 'lib/oci/core/models/egress_security_rule.rb', line 56 def @icmp_options end |
#is_stateless ⇒ BOOLEAN
A stateless rule allows traffic in one direction. Remember to add a corresponding stateless rule in the other direction if you need to support bidirectional traffic. For example, if egress traffic allows TCP destination port 80, there should be an ingress rule to allow TCP source port 80. Defaults to false, which means the rule is stateful and a corresponding rule is not necessary for bidirectional traffic.
65 66 67 |
# File 'lib/oci/core/models/egress_security_rule.rb', line 65 def is_stateless @is_stateless end |
#protocol ⇒ String
[Required] The transport protocol. Specify either ‘all` or an IPv4 protocol number as defined in [Protocol Numbers](www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml). Options are supported only for ICMP ("1"), TCP ("6"), UDP ("17"), and ICMPv6 ("58").
73 74 75 |
# File 'lib/oci/core/models/egress_security_rule.rb', line 73 def protocol @protocol end |
#tcp_options ⇒ OCI::Core::Models::TcpOptions
Optional and valid only for TCP. Use to specify particular destination ports for TCP rules. If you specify TCP as the protocol but omit this object, then all destination ports are allowed.
79 80 81 |
# File 'lib/oci/core/models/egress_security_rule.rb', line 79 def @tcp_options end |
#udp_options ⇒ OCI::Core::Models::UdpOptions
Optional and valid only for UDP. Use to specify particular destination ports for UDP rules. If you specify UDP as the protocol but omit this object, then all destination ports are allowed.
85 86 87 |
# File 'lib/oci/core/models/egress_security_rule.rb', line 85 def @udp_options end |
Class Method Details
.attribute_map ⇒ Object
Attribute mapping from ruby-style variable name to JSON key.
88 89 90 91 92 93 94 95 96 97 98 99 100 |
# File 'lib/oci/core/models/egress_security_rule.rb', line 88 def self.attribute_map { # rubocop:disable Style/SymbolLiteral 'destination': :'destination', 'destination_type': :'destinationType', 'icmp_options': :'icmpOptions', 'is_stateless': :'isStateless', 'protocol': :'protocol', 'tcp_options': :'tcpOptions', 'udp_options': :'udpOptions' # rubocop:enable Style/SymbolLiteral } end |
.swagger_types ⇒ Object
Attribute type mapping.
103 104 105 106 107 108 109 110 111 112 113 114 115 |
# File 'lib/oci/core/models/egress_security_rule.rb', line 103 def self.swagger_types { # rubocop:disable Style/SymbolLiteral 'destination': :'String', 'destination_type': :'String', 'icmp_options': :'OCI::Core::Models::IcmpOptions', 'is_stateless': :'BOOLEAN', 'protocol': :'String', 'tcp_options': :'OCI::Core::Models::TcpOptions', 'udp_options': :'OCI::Core::Models::UdpOptions' # rubocop:enable Style/SymbolLiteral } end |
Instance Method Details
#==(other) ⇒ Object
Checks equality by comparing each attribute.
193 194 195 196 197 198 199 200 201 202 203 204 |
# File 'lib/oci/core/models/egress_security_rule.rb', line 193 def ==(other) return true if equal?(other) self.class == other.class && destination == other.destination && destination_type == other.destination_type && == other. && is_stateless == other.is_stateless && protocol == other.protocol && == other. && == other. end |
#build_from_hash(attributes) ⇒ Object
Builds the object from hash
229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 |
# File 'lib/oci/core/models/egress_security_rule.rb', line 229 def build_from_hash(attributes) return nil unless attributes.is_a?(Hash) self.class.swagger_types.each_pair do |key, type| if type =~ /^Array<(.*)>/i # check to ensure the input is an array given that the the attribute # is documented as an array but the input is not if attributes[self.class.attribute_map[key]].is_a?(Array) public_method("#{key}=").call( attributes[self.class.attribute_map[key]] .map { |v| OCI::Internal::Util.convert_to_type(Regexp.last_match(1), v) } ) end elsif !attributes[self.class.attribute_map[key]].nil? public_method("#{key}=").call( OCI::Internal::Util.convert_to_type(type, attributes[self.class.attribute_map[key]]) ) end # or else data not found in attributes(hash), not an issue as the data can be optional end self end |
#eql?(other) ⇒ Boolean
209 210 211 |
# File 'lib/oci/core/models/egress_security_rule.rb', line 209 def eql?(other) self == other end |
#hash ⇒ Fixnum
Calculates hash code according to all attributes.
218 219 220 |
# File 'lib/oci/core/models/egress_security_rule.rb', line 218 def hash [destination, destination_type, , is_stateless, protocol, , ].hash end |
#to_hash ⇒ Hash
Returns the object in the form of hash
262 263 264 265 266 267 268 269 270 271 |
# File 'lib/oci/core/models/egress_security_rule.rb', line 262 def to_hash hash = {} self.class.attribute_map.each_pair do |attr, param| value = public_method(attr).call next if value.nil? && !instance_variable_defined?("@#{attr}") hash[param] = _to_hash(value) end hash end |
#to_s ⇒ String
Returns the string representation of the object
256 257 258 |
# File 'lib/oci/core/models/egress_security_rule.rb', line 256 def to_s to_hash.to_s end |