Class: Zlib::ZStream
- Inherits:
-
Object
- Object
- Zlib::ZStream
- Defined in:
- ext/zlib/zlib.c,
ext/zlib/zlib.c
Overview
Zlib::ZStream is the abstract class for the stream which handles the compressed data. The operations are defined in the subclasses: Zlib::Deflate for compression, and Zlib::Inflate for decompression.
An instance of Zlib::ZStream has one stream (struct zstream in the source) and two variable-length buffers which associated to the input (next_in) of the stream and the output (next_out) of the stream. In this document, “input buffer” means the buffer for input, and “output buffer” means the buffer for output.
Data input into an instance of Zlib::ZStream are temporally stored into the end of input buffer, and then data in input buffer are processed from the beginning of the buffer until no more output from the stream is produced (i.e. until avail_out > 0 after processing). During processing, output buffer is allocated and expanded automatically to hold all output data.
Some particular instance methods consume the data in output buffer and return them as a String.
Here is an ascii art for describing above:
+================ an instance of Zlib::ZStream ================+
|| ||
|| +--------+ +-------+ +--------+ ||
|| +--| output |<---------|zstream|<---------| input |<--+ ||
|| | | buffer | next_out+-------+next_in | buffer | | ||
|| | +--------+ +--------+ | ||
|| | | ||
+===|======================================================|===+
| |
v |
"output data" "input data"
If an error occurs during processing input buffer, an exception which is a subclass of Zlib::Error is raised. At that time, both input and output buffer keep their conditions at the time when the error occurs.
Method Catalogue
Many of the methods in this class are fairly low-level and unlikely to be of interest to users. In fact, users are unlikely to use this class directly; rather they will be interested in Zlib::Inflate and Zlib::Deflate.
The higher level methods are listed below.
-
#total_in
-
#total_out
-
#data_type
-
#adler
-
#reset
-
#finish
-
#finished?
-
#close
-
#closed?
Instance Method Summary collapse
-
#adler ⇒ Object
Returns the adler-32 checksum.
-
#avail_in ⇒ Object
Returns bytes of data in the input buffer.
-
#avail_out ⇒ Object
Returns number of bytes of free spaces in output buffer.
-
#avail_out=(size) ⇒ Object
Allocates
size
bytes of free space in the output buffer. -
#close ⇒ Object
Closes the stream.
-
#closed? ⇒ Boolean
Returns true if the stream is closed.
-
#data_type ⇒ Object
Guesses the type of the data which have been inputted into the stream.
-
#end ⇒ Object
Closes the stream.
-
#ended? ⇒ Boolean
Returns true if the stream is closed.
-
#finish ⇒ Object
Finishes the stream and flushes output buffer.
-
#finished? ⇒ Boolean
Returns true if the stream is finished.
- #flush_next_in ⇒ Object
-
#flush_next_out ⇒ Object
Flushes output buffer and returns all data in that buffer.
-
#reset ⇒ Object
Resets and initializes the stream.
-
#stream_end? ⇒ Boolean
Returns true if the stream is finished.
-
#total_in ⇒ Object
Returns the total bytes of the input data to the stream.
-
#total_out ⇒ Object
Returns the total bytes of the output data from the stream.
Instance Method Details
#adler ⇒ Object
Returns the adler-32 checksum.
1560 1561 1562 1563 1564 |
# File 'ext/zlib/zlib.c', line 1560
static VALUE
rb_zstream_adler(VALUE obj)
{
return rb_uint2inum(get_zstream(obj)->stream.adler);
}
|
#avail_in ⇒ Object
Returns bytes of data in the input buffer. Normally, returns 0.
1520 1521 1522 1523 1524 1525 1526 |
# File 'ext/zlib/zlib.c', line 1520
static VALUE
rb_zstream_avail_in(VALUE obj)
{
struct zstream *z;
TypedData_Get_Struct(obj, struct zstream, &zstream_data_type, z);
return INT2FIX(NIL_P(z->input) ? 0 : (int)(RSTRING_LEN(z->input)));
}
|
#avail_out ⇒ Object
Returns number of bytes of free spaces in output buffer. Because the free space is allocated automatically, this method returns 0 normally.
1494 1495 1496 1497 1498 1499 1500 |
# File 'ext/zlib/zlib.c', line 1494
static VALUE
rb_zstream_avail_out(VALUE obj)
{
struct zstream *z;
TypedData_Get_Struct(obj, struct zstream, &zstream_data_type, z);
return rb_uint2inum(z->stream.avail_out);
}
|
#avail_out=(size) ⇒ Object
Allocates size
bytes of free space in the output buffer. If there are more than size
bytes already in the buffer, the buffer is truncated. Because free space is allocated automatically, you usually don’t need to use this method.
1508 1509 1510 1511 1512 1513 1514 1515 |
# File 'ext/zlib/zlib.c', line 1508
static VALUE
rb_zstream_set_avail_out(VALUE obj, VALUE size)
{
struct zstream *z = get_zstream(obj);
zstream_expand_buffer_into(z, FIX2INT(size));
return size;
}
|
#close ⇒ Object
Closes the stream. All operations on the closed stream will raise an exception.
1418 1419 1420 1421 1422 1423 |
# File 'ext/zlib/zlib.c', line 1418
static VALUE
rb_zstream_end(VALUE obj)
{
zstream_end(get_zstream(obj));
return Qnil;
}
|
#closed? ⇒ Boolean
Returns true if the stream is closed.
1578 1579 1580 1581 1582 1583 1584 |
# File 'ext/zlib/zlib.c', line 1578
static VALUE
rb_zstream_closed_p(VALUE obj)
{
struct zstream *z;
TypedData_Get_Struct(obj, struct zstream, &zstream_data_type, z);
return ZSTREAM_IS_READY(z) ? Qfalse : Qtrue;
}
|
#data_type ⇒ Object
Guesses the type of the data which have been inputted into the stream. The returned value is either BINARY
, ASCII
, or UNKNOWN
.
1551 1552 1553 1554 1555 |
# File 'ext/zlib/zlib.c', line 1551
static VALUE
rb_zstream_data_type(VALUE obj)
{
return INT2FIX(get_zstream(obj)->stream.data_type);
}
|
#end ⇒ Object
Closes the stream. All operations on the closed stream will raise an exception.
1418 1419 1420 1421 1422 1423 |
# File 'ext/zlib/zlib.c', line 1418
static VALUE
rb_zstream_end(VALUE obj)
{
zstream_end(get_zstream(obj));
return Qnil;
}
|
#ended? ⇒ Boolean
Returns true if the stream is closed.
1578 1579 1580 1581 1582 1583 1584 |
# File 'ext/zlib/zlib.c', line 1578
static VALUE
rb_zstream_closed_p(VALUE obj)
{
struct zstream *z;
TypedData_Get_Struct(obj, struct zstream, &zstream_data_type, z);
return ZSTREAM_IS_READY(z) ? Qfalse : Qtrue;
}
|
#finish ⇒ String #finish {|chunk| ... } ⇒ nil
Finishes the stream and flushes output buffer. If a block is given each chunk is yielded to the block until the input buffer has been flushed to the output buffer.
1445 1446 1447 1448 1449 1450 1451 1452 1453 |
# File 'ext/zlib/zlib.c', line 1445
static VALUE
rb_zstream_finish(VALUE obj)
{
struct zstream *z = get_zstream(obj);
zstream_run(z, (Bytef*)"", 0, Z_FINISH);
return zstream_detach_buffer(z);
}
|
#finished? ⇒ Boolean
Returns true if the stream is finished.
1569 1570 1571 1572 1573 |
# File 'ext/zlib/zlib.c', line 1569
static VALUE
rb_zstream_finished_p(VALUE obj)
{
return ZSTREAM_IS_FINISHED(get_zstream(obj)) ? Qtrue : Qfalse;
}
|
#flush_next_in ⇒ Object
1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 |
# File 'ext/zlib/zlib.c', line 1460
static VALUE
rb_zstream_flush_next_in(VALUE obj)
{
struct zstream *z;
VALUE dst;
TypedData_Get_Struct(obj, struct zstream, &zstream_data_type, z);
dst = zstream_detach_input(z);
return dst;
}
|
#flush_next_out ⇒ String #flush_next_out {|chunk| ... } ⇒ nil
Flushes output buffer and returns all data in that buffer. If a block is given each chunk is yielded to the block until the current output buffer has been flushed.
1480 1481 1482 1483 1484 1485 1486 1487 1488 |
# File 'ext/zlib/zlib.c', line 1480
static VALUE
rb_zstream_flush_next_out(VALUE obj)
{
struct zstream *z;
TypedData_Get_Struct(obj, struct zstream, &zstream_data_type, z);
return zstream_detach_buffer(z);
}
|
#reset ⇒ Object
Resets and initializes the stream. All data in both input and output buffer are discarded.
1429 1430 1431 1432 1433 1434 |
# File 'ext/zlib/zlib.c', line 1429
static VALUE
rb_zstream_reset(VALUE obj)
{
zstream_reset(get_zstream(obj));
return Qnil;
}
|
#stream_end? ⇒ Boolean
Returns true if the stream is finished.
1569 1570 1571 1572 1573 |
# File 'ext/zlib/zlib.c', line 1569
static VALUE
rb_zstream_finished_p(VALUE obj)
{
return ZSTREAM_IS_FINISHED(get_zstream(obj)) ? Qtrue : Qfalse;
}
|
#total_in ⇒ Object
Returns the total bytes of the input data to the stream. FIXME
1531 1532 1533 1534 1535 |
# File 'ext/zlib/zlib.c', line 1531
static VALUE
rb_zstream_total_in(VALUE obj)
{
return rb_uint2inum(get_zstream(obj)->stream.total_in);
}
|
#total_out ⇒ Object
Returns the total bytes of the output data from the stream. FIXME
1540 1541 1542 1543 1544 |
# File 'ext/zlib/zlib.c', line 1540
static VALUE
rb_zstream_total_out(VALUE obj)
{
return rb_uint2inum(get_zstream(obj)->stream.total_out);
}
|